Q2-11 [R67380.00] | Section: Spouse Labor Information |
(([partner in hh?] = 0) and (([marital status change]=1) and (([marital status code]=3) or ([marital status code]=6))))
COMMENT: WAS R WIDOWED OR DIVORCED SINCE DATE OF LAST INTERVIEW AND THERE IS NO PARTNER IN THE HOUSEHOLD CURRENTLY?
| 1 CONDITION APPLIES ...(Go To Q2-11A) |
| 0 CONDITION DOES NOT APPLY |
Q2-11A [] | Section: Spouse Labor Information |
Even though your (most recent) [husband/wife] is no longer with you, we would like to get some information about [him/her].
OCCSP-0A [] | Section: Spouse Labor Information |
(([marital status code] = 1) or ([marital status code] = 4) or ([marital status code] = 5)) and ([new spouse in hh since dli] = 0)
COMMENT: IS R MARRIED TO THE SAME SPOUSE FROM DLI? (new_spouse should never be 0 if marcode is 4 or 5)
| 1 CONDITION APPLIES ...(Go To OCCSP-D) |
| 0 CONDITION DOES NOT APPLY |
OCCSP-0B [] | Section: Spouse Labor Information |
([new spouse in hh since dli] = 1)
COMMENT: Was a new spouse reported since DLI?
| 1 CONDITION APPLIES ...(Go To OCCSP-D) |
| 0 CONDITION DOES NOT APPLY |
OCCSP-A [R67381.00] | Section: Spouse Labor Information |
([partner in hh?] = 1)
COMMENT: Did R report a partner?
| 1 CONDITION APPLIES ...(Go To OCCSP-55B) |
| 0 CONDITION DOES NOT APPLY |
OCCSP-D [R67382.00] | Section: Spouse Labor Information |
([new spouse in hh since dli] = 1)
COMMENT: Is this a new spouse since DLI?
| 1 CONDITION APPLIES ...(Go To OCCSP-55H) |
| 0 CONDITION DOES NOT APPLY |
OCCSP-55B [R67383.00] | Section: Spouse Labor Information |
SYMBOLEXIST ([spouse/partner's dli occupation])
COMMENT: Did spouse report a job description last year?
| 1 CONDITION APPLIES |
| 0 CONDITION DOES NOT APPLY ...(Go To OCCSP-55H) |
OCCSP-55C [R67384.00] | Section: Spouse Labor Information |
Now we'd like to gather some information about [name of (most recent) spouse/partner]'s work activities.........
Have the usual activities and duties of [name of (most recent) spouse/partner]'s main job changed during 1999? By "main" job, we mean the one at which [s/he] usually worked the most hours.
| 1 YES |
| 0 NO ...(Go To OCCSP-55DA) |
| 2 SPOUSE/PARTNER NOT IN HOUSEHOLD IN 1999 ...(Go To CPSSP-2) |
| 3 SPOUSE/PARTNER DID NOT WORK IN 1999 ...(Go To Q2-16) |
OCCSP-55DA [R67385.00] | Section: Spouse Labor Information |
On [Date of last interview], [name of (most recent) spouse/partner] was reported as [spouse/partner's dli occupation] and [name of (most recent) spouse/partner]'s usual activities were [spouse/partner's usual activities at dli].
Is this an accurate description of [name of (most recent) spouse/partner]'s main job in 1999?
OCCSP-55H [R67386.00] | Section: Spouse Labor Information |
{SPAR_WKINTRO}
What kind of work did {spar4} do? That is, what was {spar4}'s occupation at {his/her} main job in 1999?
(For example: plumber, typist, farmer, etc)
| 1 SELECT TO ENTER VERBATIM |
| 2 SPOUSE/PARTNER NOT IN HOUSEHOLD IN 1999 ...(Go To CPSSP-2) |
| 3 SPOUSE/PARTNER DID NOT WORK IN 1999 ...(Go To Q2-16) |
If Answer >= -2 AND Answer <= -1 Then Go To OCCSP-55I_CODE
OCCSP-55I_CODE [R67387.00] | Section: Spouse Labor Information |
(What kind of work did [name of (most recent) spouse/partner] do? That is, what was [name of (most recent) spouse/partner]'s occupation at [his/her] main job in 1999?)
(For example: plumber, typist, farmer, etc)
OCCSP-55J [] | Section: Spouse Labor Information |
What were [name of (most recent) spouse/partner]'s usual duties or activities at [his/her] main job?
(For example: types, keeps account books, files, sells cars, teaches, lays bricks, etc....)
PAYRATE-ALL-SPOUSE [R67390.00] | Section: Spouse Labor Information |
COMMENT: PAYRATE FOR SPOUSE'S PRIMARY JOB
WGSP-71A [R67391.00] | Section: Spouse Labor Information |
Now we would like to ask you a few questions concerning [name of (most recent) spouse/partner]'s earnings at [his/her] main job during 1999. Please include any tips, overtime, and bonuses and give me the amount [name of (most recent) spouse/partner] earned before deductions like taxes and Social Security were taken out.
For [name of (most recent) spouse/partner]'s main job what is the easiest way for you to report [his/her] total earnings before taxes or other deductions: hourly, weekly, annually, or on some other basis?
(READ IF NECESSARY:) We use this information to compare the amount that people earn in different types of jobs.
| 1 per hour |
| 2 per day |
| 3 per week |
| 4 bi-weekly (every 2 weeks) |
| 8 bi-monthly (twice a month) |
| 5 per month |
| 6 per year |
| 7 other (SPECIFY) |
WGSP-71B [R67392.00] | Section: Spouse Labor Information |
Did [s/he] usually receive overtime pay, tips or commissions at [his/her] main job?
WGSP-71G [R67393.00] | Section: Spouse Labor Information |
{PAYTIMEN_SP}
COMMENT: Branch according the time unit for rate of pay R reported.
| 1 per hour ...(Go To WGSP-71H) |
| 2 per day |
| 3 per week |
| 4 bi-weekly (every 2 weeks) ...(Go To WGSP-75X) |
| 8 bi-monthly (twice a month) ...(Go To WGSP-74T) |
| 5 per month ...(Go To WGSP-74T) |
| 6 per year ...(Go To WGSP-75I) |
| 7 other (SPECIFY) |
If Answer = -1 Then Go To Q2-15A
WGSP-71H [R67394.00] | Section: Spouse Labor Information |
([WGSP-71B] = 1)
COMMENT: Did R receive overtime pay, tips or commissions?
| 1 CONDITION APPLIES ...(Go To WGSP-71I) |
| 0 CONDITION DOES NOT APPLY |
WGSP-71I [R67395.00] | Section: Spouse Labor Information |
Excluding overtime pay, tips and commissions, what was [name of (most recent) spouse/partner]'s hourly rate of pay, on [his/her] job?
(ENTER AMOUNT)
If Answer = -2 Then Go To WGSP-71P
If Answer = -1 Then Go To Q2-15A
If Answer >= 0 AND Answer <= 1 Then Go To WGSP-71K
If Answer >= 30 AND Answer <= 1,000,000 Then Go To WGSP-71K
WGSP-71J [R67396.00] | Section: Spouse Labor Information |
What was [name of (most recent) spouse/partner]'s hourly rate of pay, on [his/her] job?
(ENTER AMOUNT)
If Answer = -2 Then Go To WGSP-71P
If Answer = -1 Then Go To Q2-15A
If Answer >= 0 AND Answer <= 1 Then Go To WGSP-71K
If Answer >= 30 AND Answer <= 1,000,000 Then Go To WGSP-71K
WGSP-71K [R67397.00] | Section: Spouse Labor Information |
([spouse's rate of pay] >= [Default minimum value hourly wages]) AND ([spouse's rate of pay] <= [Default maximum value hourly wages])
COMMENT: Is the reported hourly wage within the accepted range?
| 1 CONDITION APPLIES ...(Go To WGSP-71U) |
| 0 CONDITION DOES NOT APPLY |
WGSP-71P [R67398.00] | Section: Spouse Labor Information |
What is your best estimate of [name of (most recent) spouse/partner]'s hourly rate of pay?
(ENTER AMOUNT)
If Answer >= -2 AND Answer <= -1 Then Go To Q2-15A
If Answer >= 1 AND Answer <= 30 Then Go To WGSP-71PA
WGSP-71PA [R67399.00] | Section: Spouse Labor Information |
([spouse's estimated hourly rate of pay] >= [Default minimum value hourly wages]) AND ([spouse's estimated hourly rate of pay] <= [Default maximum value hourly wages])
COMMENT: Is the reported hourly wage within the accepted range?
| 1 CONDITION APPLIES ...(Go To WGSP-71U) |
| 0 CONDITION DOES NOT APPLY |
WGSP-71Q [R67400.00] | Section: Spouse Labor Information |
INTERVIEWER: DO NOT READ
EARNINGS RECORDED AS: $[spouse's hourly rate of pay for verification] HOURLY
IS THIS ENTRY CORRECT?
WGSP-71R [R67401.00] | Section: Spouse Labor Information |
INTERVIEWER: DO NOT READ
INCORRECT ENTRY IS RECORDED AS: $[spouse's hourly rate of pay for verification] HOURLY
ENTER CORRECT AMOUNT:
WGSP-71U [R67402.00] | Section: Spouse Labor Information |
How many hours did [name of (most recent) spouse/partner] usually work per week at this rate?
(ENTER NUMBER OF HOURS)
WGSP-71W [R67403.00] | Section: Spouse Labor Information |
([WGSP-71B] =1)
COMMENT: Did R receive overtime pay, tips or commissions?
| 1 CONDITION APPLIES ...(Go To WGSP-71X) |
| 0 CONDITION DOES NOT APPLY |
WGSP-71X [R67404.00] | Section: Spouse Labor Information |
At [name of (most recent) spouse/partner]'s main job, how much did [s/he] usually receive just in overtime pay, tips or commissions, before taxes or other deductions?
(INTERVIEWER:ENTER TIME UNIT FOR OVERTIME PAY FIRST. PRESS <ENTER>TO ENTER AMOUNT.)
| 1 HOURLY |
| 2 DAILY |
| 3 WEEKLY |
| 5 MONTHLY |
| 6 YEARLY |
| 7 OTHER (SPECIFY) |
WGSP-71XA [] | Section: Spouse Labor Information |
([WGSP-71X])
COMMENT: Save numeric value from text for overtime pay time unit.
| 1 CONDITION APPLIES |
| 0 CONDITION DOES NOT APPLY |
WGSP-71XB [R67405.00] | Section: Spouse Labor Information |
[WGSP-71X]
COMMENT: Translate time unit for rate of overtime pay
If Answer = -1 Then Go To Q2-15A
WGSP-71XBB [R67406.00] | Section: Spouse Labor Information |
(At [name of (most recent) spouse/partner] main job, how much did [s/he] usually receive just in overtime pay, tips or commissions, before taxes or other deductions?)
(ENTER HOURLY AMOUNT)
If Answer = -2 Then Go To WGSP-72C
If Answer = -1 Then Go To Q2-15A
If Answer >= 1 AND Answer <= 30 Then Go To WGSP-72G
WGSP-71XC [R67407.00] | Section: Spouse Labor Information |
(At [name of (most recent) spouse/partner]'s job how much did [s/he] usually receive just in overtime pay, tips or commissions, before taxes or other deductions?)
(ENTER WEEKLY AMOUNT)
If Answer = -2 Then Go To WGSP-72C
If Answer = -1 Then Go To Q2-15A
If Answer >= 1 AND Answer <= 1,500 Then Go To WGSP-72I
WGSP-71XD [R67408.00] | Section: Spouse Labor Information |
(At [name of (most recent) spouse/partner]'s main job, how much did [s/he] usually receive just in overtime pay, tips or commissions, before taxes or other deductions?)
(ENTER MONTHLY AMOUNT)
If Answer = -2 Then Go To WGSP-72C
If Answer = -1 Then Go To Q2-15A
If Answer >= 1 AND Answer <= 6,000 Then Go To WGSP-72I
WGSP-71XE [R67409.00] | Section: Spouse Labor Information |
(At [name of (most recent) spouse/partner]'s main job, how much did [s/he] usually receive just in overtime pay, tips or commissions, before taxes or other deductions?)
(ENTER ANNUAL AMOUNT)
If Answer = -2 Then Go To WGSP-72C
If Answer = -1 Then Go To Q2-15A
If Answer >= 1 AND Answer <= 72,000 Then Go To WGSP-72I
WGSP-71XF [R67410.00] | Section: Spouse Labor Information |
(At [name of (most recent) spouse/partner]'s main job, how much did [s/he] usually receive just in overtime pay, tips or commissions, before taxes or other deductions?)
(ENTER AMOUNT)
If Answer = -2 Then Go To WGSP-72C
If Answer = -1 Then Go To Q2-15A
If Answer >= 1 AND Answer <= 240 Then Go To WGSP-72C
WGSP-71XG [R67411.00] | Section: Spouse Labor Information |
(At [name of (most recent) spouse/partner]'s main job, how much did [s/he] usually receive just in overtime pay, tips or commissions, before taxes or other deductions?)
(ENTER AMOUNT)
WGSP-72C [R67412.00] | Section: Spouse Labor Information |
What is your best estimate of how much [name of (most recent) spouse/partner] usually (earn/earned) weekly, just in overtime pay, tips or commissions, before taxes or other deductions?
(ENTER AMOUNT)
If Answer >= -2 AND Answer <= -1 Then Go To Q2-15A
If Answer >= 1 AND Answer <= 1,500 Then Go To WGSP-72I
WGSP-72D [R67413.00] | Section: Spouse Labor Information |
INTERVIEWER: DO NOT READ:
USUAL [time unit text for overtime pay rate (spouse)] EARNINGS IN OVERTIME PAY, TIPS OR COMMISSIONS RECORDED AS: $[spouse's overtime pay amount for verification]
IS THIS ENTRY CORRECT?
WGSP-72E [] | Section: Spouse Labor Information |
INTERVIEWER: DO NOT READ
INCORRECT ENTRY IS RECORDED AS: $[spouse's overtime pay amount for verification] [time unit text for overtime pay rate (spouse)]
ENTER CORRECT AMOUNT:
WGSP-72F [R67414.00] | Section: Spouse Labor Information |
{OVERTIMEUN_SP}
COMMENT: What time unit of overtime pay did R report?
| 1 per hour ...(Go To WGSP-72G) |
| 2 per day ...(Go To WGSP-72I) |
| 3 per week |
| 4 bi-weekly (every 2 weeks) |
| 8 bi-monthly (twice a month) |
| 5 per month |
| 6 per year |
| 7 other (SPECIFY) ...(Go To WGSP-72I) |
WGSP-72G [R67415.00] | Section: Spouse Labor Information |
How many hours did [name of (most recent) spouse/partner] usually work per week at this rate?
(ENTER NUMBER OF HOURS)
If Answer = -2 Then Go To WGSP-72H
If Answer = -1 Then Go To Q2-15A
WGSP-72H [R67416.00] | Section: Spouse Labor Information |
What is your best estimate of the number of hours per week[name of (most recent) spouse/partner] usually [work(ed)] at this rate?
(ENTER NUMBER OF HOURS)
If Answer >= -2 AND Answer <= -1 Then Go To Q2-15A
WGSP-72I [R67417.00] | Section: Spouse Labor Information |
([spouse's rate of pay] >= 0)
COMMENT: Did R report a payrate?
| 1 CONDITION APPLIES ...(Go To WGSP-72M) |
| 0 CONDITION DOES NOT APPLY |
Default Next: | WGSP-72K |
Lead-In: | WGSP-71XC [1:1,500], WGSP-71XD [1:6,000], WGSP-71XE [1:72,000], WGSP-72C [1:1,500], WGSP-72F [2:2], WGSP-72F [7:7], WGSP-71W [Default], WGSP-72F [Default], WGSP-72G [Default], WGSP-72H [Default] |
WGSP-72K [R67418.00] | Section: Spouse Labor Information |
INPATH ([WGSP-71P])
COMMENT: Did R report a payrate after initial DK response?
| 1 CONDITION APPLIES ...(Go To WGSP-72M) |
| 0 CONDITION DOES NOT APPLY |
WGSP-72M [R67419.00] | Section: Spouse Labor Information |
INPATH ([WGSP-71U])
COMMENT: Did R report hours per week at usual rate of pay, either in this ES or in the general CPS section for main job?
| 1 CONDITION APPLIES ...(Go To WGSP-72O) |
| 0 CONDITION DOES NOT APPLY |
WGSP-72NA [] | Section: Spouse Labor Information |
INPATH ([WGSP-71X])
COMMENT: check if answered this question
| 1 CONDITION APPLIES ...(Go To WGSP-72NB) |
| 0 CONDITION DOES NOT APPLY |
WGSP-72NB [] | Section: Spouse Labor Information |
INPATH ([WGSP-72c])
COMMENT: check if answered this question
| 1 CONDITION APPLIES ...(Go To WGSP-72O) |
| 0 CONDITION DOES NOT APPLY |
WGSP-72O [R67420.00] | Section: Spouse Labor Information |
(([spouse's overtime pay amount (non-estimate)] >= 0) AND (([time unit code for overtime pay rate (spouse)] != 2) AND (([estimate of overtime pay-- spouse/partner] < 1) OR
([estimate of overtime pay-- spouse/partner] > 240))) AND ([time unit code for overtime pay rate (spouse)] != 7))
COMMENT: Did R report a overtime pay?
| 1 CONDITION APPLIES ...(Go To WGSP-72U) |
| 0 CONDITION DOES NOT APPLY |
WGSP-72Q [R67421.00] | Section: Spouse Labor Information |
INPATH ([WGSP-72C])
COMMENT: Did R report overtime pay after initial DK response?
| 1 CONDITION APPLIES ...(Go To WGSP-72U) |
| 0 CONDITION DOES NOT APPLY |
WGSP-72U [R67422.00] | Section: Spouse Labor Information |
INPATH ([WGSP-72G])
COMMENT: Fix hours worked for overtime pay as answer reported by R.
| 1 CONDITION APPLIES ...(Go To WGSP-72X) |
| 0 CONDITION DOES NOT APPLY |
WGSP-72X [R67423.00] | Section: Spouse Labor Information |
([spar's rate of pay] >= 0) AND ([Hours spouse/partner usually worked per week at hourly rate of pay for main job] >= 0) AND
([estimated spouse's weekly overtime pay] >= 0) AND ([hours per week at overtime rate of pay (spouse)] >= 0) AND ([time unit for spouse's overtime pay rate] >= 0)
COMMENT: Do all elements of the overtime pay have a real value.
| 1 CONDITION APPLIES ...(Go To WGSP-72Y) |
| 0 CONDITION DOES NOT APPLY |
WGSP-72Y [R67424.00] | Section: Spouse Labor Information |
([time unit code for overtime pay rate (spouse)])
COMMENT: SKIP ACCORDING TO OVERTIME TIME UNIT
| 1 per hour ...(Go To WGSP-72ZA) |
| 2 per day |
| 3 per week |
| 4 bi-weekly (every 2 weeks) |
| 8 bi-monthly (twice a month) |
| 5 per month |
| 6 per year |
| 7 other (SPECIFY) |
| 0 RECEIVED NONE ...(Go To WGSP-73BA) |
WGSP-72ZA [R67425.00] | Section: Spouse Labor Information |
([CALCULATE OVERTIME WEEKLY EARNINGS] / 100.0)
COMMENT: CALCULATE DOLLARS AND CENTS OVERTIME WEEKLY EARNINGS
WGSP-73AA [R67426.00] | Section: Spouse Labor Information |
([CALCULATE OVERTIME WEEKLY EARNINGS])
COMMENT: CALCULATE DOLLARS AND CENTS OVERTIME WEEKLY EARNINGS
WGSP-73BA [R67427.00] | Section: Spouse Labor Information |
(([CALCULATE WEEKLY EARNINGS]/100.0) + [calculated weekly overtime pay amount (spouse)])
COMMENT: Save calculated weekly earnings
WGSP-73D [R67428.00] | Section: Spouse Labor Information |
I have estimated [name of (most recent) spouse/partner]'s usual weekly earnings for [his/her] main job as $[calculated weekly earnings- spouse] before taxes or other deductions.
Does that sound correct?
If Answer = -2 Then Go To WGSP-73E
WGSP-73E [R67429.00] | Section: Spouse Labor Information |
I have recorded:
1) [spar's rate of pay] as [name of (most recent) spouse/partner]'s hourly rate of pay,
2) [Hours spouse/partner usually worked per week at hourly rate of pay for main job] as the number of hours [name of (most recent) spouse/partner] usually (work/worked) at this rate,
3) [calculated weekly overtime pay amount (spouse)] as the amount [name of (most recent) spouse/partner] usually (earns/earned) weekly in overtime pay, tips and commissions, and....
4) [hours per week at overtime rate of pay (spouse)] as the number of hours per week [name of (most recent) spouse/partner] usually (work/worked)
at this rate
Which piece of information does not seem to be correct?
(MARK ALL THAT APPLY))
| 1 Regular hourly rate of pay |
| 2 Hours worked at regular hourly rate of pay |
| 3 Overtime pay rate |
| 4 Hours worked at overtime pay rate |
| 5 Nothing seems to be incorrect |
WGSP-73H [R67430.00] | Section: Spouse Labor Information |
INLIST([WGSP-73E],5)
COMMENT: Did R indicate that none of the figures seemed incorrect?
| 1 CONDITION APPLIES ...(Go To WGSP-73Q) |
| 0 CONDITION DOES NOT APPLY |
WGSP-73I [R67431.00] | Section: Spouse Labor Information |
INLIST([WGSP-73E],1)
COMMENT: Did R indicate that hourly rate of pay seemed incorrect?
| 1 CONDITION APPLIES ...(Go To WGSP-73J) |
| 0 CONDITION DOES NOT APPLY |
WGSP-73J [R67432.00] | Section: Spouse Labor Information |
What was [name of (most recent) spouse/partner] hourly rate of pay on [his/her] main job, excluding overtime pay, tips or commissions?
(INTERVIEWER: IF OVER $30.00 OR UNDER $1.00, PLEASE VERIFY AMOUNT.)
WGSP-73K [R67433.00] | Section: Spouse Labor Information |
INLIST([WGSP-73E],2)
COMMENT: Did R indicate that hours worked at hourly rate of pay seemed
incorrect?
| 1 CONDITION APPLIES ...(Go To WGSP-73L) |
| 0 CONDITION DOES NOT APPLY |
WGSP-73L [R67434.00] | Section: Spouse Labor Information |
How many hours did [name of (most recent) spouse/partner] usually work per week at the rate of $[spar's rate of pay]?
(ENTER NUMBER OF HOURS)
WGSP-73M [R67435.00] | Section: Spouse Labor Information |
INLIST([WGSP-73E],3)
COMMENT: Did R indicate that weekly overtime pay seemed incorrect?
| 1 CONDITION APPLIES ...(Go To WGSP-73N) |
| 0 CONDITION DOES NOT APPLY |
WGSP-73N [R67436.00] | Section: Spouse Labor Information |
How much did [name of (most recent) spouse/partner] usually earn weekly just in overtime pay, tips or commissions?
(ENTER AMOUNT)
WGSP-73O [R67437.00] | Section: Spouse Labor Information |
INLIST([WGSP-73E],4)
COMMENT: Did R indicate that hours worked at overtime rate of pay seemed incorrect?
| 1 CONDITION APPLIES ...(Go To WGSP-73P) |
| 0 CONDITION DOES NOT APPLY |
WGSP-73P [R67438.00] | Section: Spouse Labor Information |
How many hours did [name of (most recent) spouse/partner] usually work per week at the rate of $[calculated weekly overtime pay amount (spouse)]?
(ENTER NUMBER OF HOURS)
WGSP-73Q [R67439.00] | Section: Spouse Labor Information |
Then, (including overtime pay), tips and commissions, what were [name of (most recent) spouse/partner]'s usual weekly earnings on this job, before taxes or other deductions?
(INTERVIEWER: IF MORE THAN $1500.00 OR LESS THAN $1.00, PLEASE VERIFY. ENTER AMOUNT)
WGSP-73R [R67440.00] | Section: Spouse Labor Information |
INPATH ([WGSP-73J])
COMMENT: Did R correct the hourly rate of pay?
| 1 CONDITION APPLIES ...(Go To WGSP-73U) |
| 0 CONDITION DOES NOT APPLY |
WGSP-73U [R67441.00] | Section: Spouse Labor Information |
INPATH ([WGSP-73L])
COMMENT: Did R correct the hours worked per week at usual rate of pay?
| 1 CONDITION APPLIES ...(Go To WGSP-73X) |
| 0 CONDITION DOES NOT APPLY |
WGSP-73X [R67442.00] | Section: Spouse Labor Information |
INPATH ([WGSP-73N])
COMMENT: Did R correct the weekly overtime pay?
| 1 CONDITION APPLIES ...(Go To WGSP-73ZA) |
| 0 CONDITION DOES NOT APPLY |
WGSP-73ZA [] | Section: Spouse Labor Information |
([weekly overtime pay amount (incorporating corrections)] >= 0)
COMMENT: Does the overtime weekly pay have a real value.
| 1 CONDITION APPLIES |
| 0 CONDITION DOES NOT APPLY |
WGSP-73ZB [] | Section: Spouse Labor Information |
([hourly rate of pay (incorporating corrections)] >= 0) AND ([Final corrected hours worked per week] >= 0)
COMMENT: Do all elements of the payrate have a real value.
| 1 CONDITION APPLIES |
| 0 CONDITION DOES NOT APPLY |
WGSP-73ZC [R67443.00] | Section: Spouse Labor Information |
([WGSP-73Za] = 1) AND ([WGSP-73Zb] = 1)
COMMENT: Are all elements of payrate and overtime pay valid values?
| 1 CONDITION APPLIES |
| 0 CONDITION DOES NOT APPLY |
WGSP-74AB [R67444.00] | Section: Spouse Labor Information |
([Save calculated weekly earnings ] /100) + [weekly overtime pay amount (incorporating corrections)]
COMMENT: Save calculated weekly earnings
WGSP-74B [R67445.00] | Section: Spouse Labor Information |
I have estimated [name of (most recent) spouse/partner]'s total weekly earnings for [his/her] main job, as $[Corrected weekly earnings including overtime] before taxes or other deductions. Does that sound correct?
| 1 YES |
| 0 NO, IRRECONCILABLE DIFFERENCE |
WGSP-74C [R67446.00] | Section: Spouse Labor Information |
([WGSP-71B] = 1)
COMMENT: Did R report overtime, tips and/or commissions?
Beginning series for daily/weekly/other time unit ROP - see WGSP-71G
| 1 CONDITION APPLIES ...(Go To WGSP-74E) |
| 0 CONDITION DOES NOT APPLY |
WGSP-74D [R67447.00] | Section: Spouse Labor Information |
What were [name of (most recent) spouse/partner]'s usual weekly earnings on [his/her] main job before taxes or other deductions?
(ENTER AMOUNT)
If Answer = -2 Then Go To WGSP-74K
If Answer = -1 Then Go To Q2-15A
If Answer >= 1 AND Answer <= 1,500 Then Go To WGSP-74KA
WGSP-74E [R67448.00] | Section: Spouse Labor Information |
Including overtime pay, tips and commissions, what were [name of (most recent) spouse/partner]'s usual weekly earnings on [his/her] main job, before taxes or other deductions?
(ENTER AMOUNT)
If Answer = -2 Then Go To WGSP-74K
If Answer = -1 Then Go To Q2-15A
If Answer >= 1 AND Answer <= 1,500 Then Go To WGSP-74KA
WGSP-74K [R67449.00] | Section: Spouse Labor Information |
What is your best estimate of [name of (most recent) spouse/partner]'s usual weekly earnings before taxes or other deductions?
(ENTER AMOUNT)
If Answer >= -2 AND Answer <= -1 Then Go To Q2-15A
If Answer >= 1 AND Answer <= 1,500 Then Go To WGSP-74KB
WGSP-74KA [R67450.00] | Section: Spouse Labor Information |
([spouse's rate of pay] >= [default minimum value r's reported weekly wages]) AND ([spouse's rate of pay] <= [default maximum value r's reported weekly wages])
COMMENT: Is the reported weekly wage within the accepted range?
| 1 CONDITION APPLIES ...(Go To WGSP-74N) |
| 0 CONDITION DOES NOT APPLY |
WGSP-74KB [R67451.00] | Section: Spouse Labor Information |
([spouse's estimated hourly rate of pay] >= [default minimum value r's reported weekly wages]) AND ([spouse's estimated hourly rate of pay] <= [default maximum value r's reported weekly wages])
COMMENT: Is the reported weekly wage within the accepted range?
| 1 CONDITION APPLIES ...(Go To WGSP-74L) |
| 0 CONDITION DOES NOT APPLY |
WGSP-74L [R67452.00] | Section: Spouse Labor Information |
INTERVIEWER: DO NOT READ
EARNINGS RECORDED AS: $[spouse's weekly rate of pay for verification] WEEKLY
IS THIS ENTRY CORRECT?
WGSP-74M [R67453.00] | Section: Spouse Labor Information |
INTERVIEWER: DO NOT READ
INCORRECT ENTRY IS RECORDED AS: $[spouse's weekly rate of pay for verification] WEEKLY
ENTER CORRECT AMOUNT:
WGSP-74N [R67454.00] | Section: Spouse Labor Information |
I have recorded [name of (most recent) spouse/partner]'s total earnings for [his/her] main job in 1999 as $[spouse's weekly rate of pay for verification] weekly before taxes or other deductions. Is that correct?
WGSP-74O [R67455.00] | Section: Spouse Labor Information |
([time unit code spar's rate of pay]=1)
COMMENT: Did R report an hourly time unit for rate of pay? This shouldn't
happen in this part of the series.
| 1 CONDITION APPLIES |
| 0 CONDITION DOES NOT APPLY |
WGSP-74P [R67456.00] | Section: Spouse Labor Information |
([WGSP-71B] = 1)
COMMENT: Did R report overtime, tips and/or commissions?
| 1 CONDITION APPLIES ...(Go To WGSP-74Q) |
| 0 CONDITION DOES NOT APPLY |
WGSP-74Q [] | Section: Spouse Labor Information |
Including overtime pay, tips and commissions, what were [name of (most recent) spouse/partner]'s usual weekly earnings on [his/her] job, before taxes or other deductions?
(INTERVIEWER: IF MORE THAN $1500.00 OR LESS THAN $1.00, PLEASE VERIFY AMOUNTS.)
If Answer >= -2 AND Answer <= -1 Then Go To WGSP-76O
WGSP-74R [R67457.00] | Section: Spouse Labor Information |
What were [name of (most recent) spouse/partner]'s usual weekly earnings on [his/her] main job in 1999 before taxes or other deductions?
(INTERVIEWER: IF MORE THAN $1500.00 OR LESS THAN $1.00, PLEASE VERIFY AMOUNTS.)
If Answer >= -2 AND Answer <= -1 Then Go To WGSP-76O
WGSP-74S [R67458.00] | Section: Spouse Labor Information |
([time unit code spar's rate of pay] = 1)
COMMENT: Did R report an hourly time unit for rate of pay?
| 1 CONDITION APPLIES |
| 0 CONDITION DOES NOT APPLY |
WGSP-74T [R67459.00] | Section: Spouse Labor Information |
([WGSP-71B] = 1)
COMMENT: Did R report overtime, tips and/or commissions?
Beginning series for monthly and bi-monthly time units for ROP
| 1 CONDITION APPLIES ...(Go To WGSP-74V) |
| 0 CONDITION DOES NOT APPLY |
WGSP-74U [R67460.00] | Section: Spouse Labor Information |
What were [name of (most recent) spouse/partner]'s usual monthly earnings on [his/her] main job in 1999, before taxes or other deductions?
(ENTER AMOUNT)
If Answer = -2 Then Go To WGSP-75B
If Answer = -1 Then Go To Q2-15A
If Answer >= 1 AND Answer <= 6,000 Then Go To WGSP-75BA
WGSP-74V [R67461.00] | Section: Spouse Labor Information |
Including overtime pay, tips and commissions, what were [name of (most recent) spouse/partner]'s usual monthly earnings on [his/her] main job before taxes or other deductions?
(ENTER AMOUNT)
If Answer = -2 Then Go To WGSP-75B
If Answer = -1 Then Go To Q2-15A
If Answer >= 1 AND Answer <= 6,000 Then Go To WGSP-75BA
WGSP-75B [R67462.00] | Section: Spouse Labor Information |
What is your best estimate of [name of (most recent) spouse/partner]'s usual monthly earnings before taxes or other deductions?
(ENTER AMOUNT)
If Answer >= -2 AND Answer <= -1 Then Go To Q2-15A
If Answer >= 1 AND Answer <= 6,000 Then Go To WGSP-75BB
WGSP-75BA [R67463.00] | Section: Spouse Labor Information |
([spouse's rate of pay] >= [Default minimum value monthly wages]) AND ([spouse's rate of pay] <= [Default maximum value monthly wages])
COMMENT: Is the reported monthly wage within the accepted range?
| 1 CONDITION APPLIES ...(Go To WGSP-75E) |
| 0 CONDITION DOES NOT APPLY |
WGSP-75BB [R67464.00] | Section: Spouse Labor Information |
([spouse's estimated hourly rate of pay] >= [Default minimum value monthly wages]) AND ([spouse's estimated hourly rate of pay] <= [Default maximum value monthly wages])
COMMENT: Is the reported monthly wage within the accepted range?
| 1 CONDITION APPLIES ...(Go To WGSP-75E) |
| 0 CONDITION DOES NOT APPLY |
WGSP-75C [R67465.00] | Section: Spouse Labor Information |
INTERVIEWER: DO NOT READ
EARNINGS RECORDED AS: $[spouse's monthly rate of pay for verification] MONTHLY. IS THIS ENTRY CORRECT?
WGSP-75D [] | Section: Spouse Labor Information |
INTERVIEWER: DO NOT READ
INCORRECT ENTRY IS RECORDED AS: $[spouse's monthly rate of pay for verification] MONTHLY
ENTER CORRECT AMOUNT:
WGSP-75E [R67466.00] | Section: Spouse Labor Information |
I have recorded [name of (most recent) spouse/partner]'s total earnings for [his/her] main job as $[spouse's monthly rate of pay for verification] monthly before taxes or other deductions. Is that correct?
WGSP-75F [R67467.00] | Section: Spouse Labor Information |
([WGSP-71B] = 1)
COMMENT: Did R report overtime, tips and/or commissions?
| 1 CONDITION APPLIES ...(Go To WGSP-75G) |
| 0 CONDITION DOES NOT APPLY |
WGSP-75G [] | Section: Spouse Labor Information |
Including overtime pay, tips and commissions, what were [name of (most recent) spouse/partner]'s usual monthly earnings on [his/her], before taxes or other deductions?
(INTERVIEWER: IF MORE THAN $6000.00 OR LESS THAN $1.00, PLEASE VERIFY AMOUNTS.)
WGSP-75H [R67468.00] | Section: Spouse Labor Information |
What were [name of (most recent) spouse/partner]'s usual monthly earnings on [his/her] job before taxes or other deductions?
(INTERVIEWER:IF MORE THAN $6000.00 OR LESS THAN $1.00, PLEASE VERIFY AMOUNTS.)
WGSP-75I [R67469.00] | Section: Spouse Labor Information |
([WGSP-71B] = 1)
COMMENT: Did R report overtime, tips and/or commissions?
Beginning series for those reporting annual ROP. See WGSP-71G
| 1 CONDITION APPLIES ...(Go To WGSP-75K) |
| 0 CONDITION DOES NOT APPLY |
WGSP-75J [R67470.00] | Section: Spouse Labor Information |
What were [name of (most recent) spouse/partner]'s usual annual earnings on [his/her] job, before taxes or other deductions?
(ENTER AMOUNT)
If Answer = -2 Then Go To WGSP-75Q
If Answer = -1 Then Go To Q2-15A
If Answer >= 1 AND Answer <= 72,000 Then Go To WGSP-75QA
WGSP-75K [R67471.00] | Section: Spouse Labor Information |
Including overtime pay, tips and commissions, what are [name of (most recent) spouse/partner]'s usual annual earnings on [his/her] main job, before taxes or other deductions?
(ENTER AMOUNT)
If Answer = -2 Then Go To WGSP-75Q
If Answer = -1 Then Go To Q2-15A
If Answer >= 1 AND Answer <= 72,000 Then Go To WGSP-75QA
WGSP-75Q [R67472.00] | Section: Spouse Labor Information |
What is your best estimate of [name of (most recent) spouse/partner]'s usual annual earnings before taxes or other deductions?
(ENTER AMOUNT)
If Answer >= -2 AND Answer <= -1 Then Go To Q2-15A
If Answer >= 1 AND Answer <= 72,000 Then Go To WGSP-75QB
WGSP-75QA [R67473.00] | Section: Spouse Labor Information |
([spouse's rate of pay] >= [Default minimum value annual wages ]) AND ([spouse's rate of pay] <= [Default maximum value annual wages])
COMMENT: Is the reported annual wage within the accepted range?
| 1 CONDITION APPLIES ...(Go To WGSP-75T) |
| 0 CONDITION DOES NOT APPLY |
WGSP-75QB [R67474.00] | Section: Spouse Labor Information |
([spouse's estimated hourly rate of pay] >= [Default minimum value annual wages ]) AND ([spouse's estimated hourly rate of pay] <= [Default maximum value annual wages])
COMMENT: Is the reported annual wage within the accepted range?
| 1 CONDITION APPLIES ...(Go To WGSP-75T) |
| 0 CONDITION DOES NOT APPLY |
WGSP-75R [R67475.00] | Section: Spouse Labor Information |
INTERVIEWER: DO NOT READ
EARNINGS RECORDED AS: $[spouse's annual rate of pay for verification] ANNUALLY.
IS THIS ENTRY CORRECT?
WGSP-75S [] | Section: Spouse Labor Information |
INTERVIEWER: DO NOT READ
INCORRECT ENTRY IS RECORDED AS: $[spouse's annual rate of pay for verification] ANNUALLY.
ENTER CORRECT AMOUNT:
WGSP-75T [R67476.00] | Section: Spouse Labor Information |
I have recorded [name of (most recent) spouse/partner]'s total earnings for [his/her] main job as $[spouse's annual rate of pay for verification] annually before taxes or other deductions. Is that correct?
WGSP-75U [R67477.00] | Section: Spouse Labor Information |
([WGSP-71B] = 1)
COMMENT: Did R report overtime, tips and/or commissions?
| 1 CONDITION APPLIES ...(Go To WGSP-75V) |
| 0 CONDITION DOES NOT APPLY |
WGSP-75V [] | Section: Spouse Labor Information |
Including overtime pay, tips and commissions, what were [name of (most recent) spouse/partner]'s usual annual earnings on [his/her] main job, before taxes or other deductions?
(INTERVIEWER: IF MORE THAN $72,000.00 OR LESS THAN $1.00, PLEASE VERIFY AMOUNTS.)
If Answer >= -2 AND Answer <= -1 Then Go To WGSP-76O
WGSP-75W [R67478.00] | Section: Spouse Labor Information |
What were [name of (most recent) spouse/partner]'s usual annual earnings on [his/her] main job before taxes or other deductions?
(INTERVIEWER: IF MORE THAN $72,000.00 OR LESS THAN $1.00, PLEASE VERIFY AMOUNTS.)
If Answer >= -2 AND Answer <= -1 Then Go To WGSP-76O
WGSP-75X [R67479.00] | Section: Spouse Labor Information |
([WGSP-71B] = 1)
COMMENT: Did R report overtime, tips and/or commissions?
Beginning series for R's that reported bi-weekly ROP in WGSP-71G
| 1 CONDITION APPLIES ...(Go To WGSP-75Z) |
| 0 CONDITION DOES NOT APPLY |
WGSP-75Y [R67480.00] | Section: Spouse Labor Information |
What were [name of (most recent) spouse/partner]'s usual bi-weekly earnings on [his/her] main job, before taxes or other deductions?
(ENTER AMOUNT)
If Answer = -2 Then Go To WGSP-76F
If Answer = -1 Then Go To Q2-15A
If Answer >= 1 AND Answer <= 3,000 Then Go To WGSP-76FA
WGSP-75Z [R67481.00] | Section: Spouse Labor Information |
Including overtime pay, tips and commissions, what were [name of (most recent) spouse/partner]'s usual bi-weekly earnings on [his/her] main job, before taxes or other deductions?
(ENTER AMOUNT)
If Answer = -2 Then Go To WGSP-76F
If Answer = -1 Then Go To Q2-15A
If Answer >= 1 AND Answer <= 3,000 Then Go To WGSP-76FA
WGSP-76F [R67482.00] | Section: Spouse Labor Information |
What is your best estimate of [name of (most recent) spouse/partner]'s usual bi-weekly earnings before taxes or other deductions at [his/her] main job?
(ENTER AMOUNT)
If Answer >= -2 AND Answer <= -1 Then Go To Q2-15A
If Answer >= 1 AND Answer <= 3,000 Then Go To WGSP-76FB
WGSP-76FA [R67483.00] | Section: Spouse Labor Information |
([spouse's rate of pay] >= [Default minimum value bi-weekly wages]) AND ([spouse's rate of pay] <= [Default maximum value bi-weekly wages])
COMMENT: Is the reported biweekly wage within the accepted range?
| 1 CONDITION APPLIES ...(Go To WGSP-76I) |
| 0 CONDITION DOES NOT APPLY |
WGSP-76FB [R67484.00] | Section: Spouse Labor Information |
([spouse's estimated hourly rate of pay] >= [Default minimum value bi-weekly wages]) AND ([spouse's estimated hourly rate of pay] <= [Default maximum value bi-weekly wages])
COMMENT: Is the reported biweekly wage within the accepted range?
| 1 CONDITION APPLIES ...(Go To WGSP-76I) |
| 0 CONDITION DOES NOT APPLY |
WGSP-76G [R67485.00] | Section: Spouse Labor Information |
INTERVIEWER: DO NOT READ
EARNINGS RECORDED AS: $[spouse's bi-weekly rate of pay for verification] BI-WEEKLY.
IS THIS ENTRY CORRECT?
WGSP-76H [] | Section: Spouse Labor Information |
INTERVIEWER: DO NOT READ
INCORRECT ENTRY IS RECORDED AS: $[spouse's bi-weekly rate of pay for verification] BI-WEEKLY.
ENTER CORRECT AMOUNT:
WGSP-76I [R67486.00] | Section: Spouse Labor Information |
I have recorded [name of (most recent) spouse/partner]'s total earnings for [his/her] main job as $[spouse's bi-weekly rate of pay for verification] bi-weekly before taxes or other deductions. Is that correct?
WGSP-76J [R67487.00] | Section: Spouse Labor Information |
([WGSP-71B] = 1)
COMMENT: Did R report overtime, tips and/or commissions?
| 1 CONDITION APPLIES ...(Go To WGSP-76K) |
| 0 CONDITION DOES NOT APPLY |
WGSP-76K [] | Section: Spouse Labor Information |
Including overtime pay, tips and commissions,what were [name of (most recent) spouse/partner]'s usual bi-weekly earnings on [his/her] main job, before taxes or other deductions?
(INTERVIEWER: IF MORE THAN $3000.00 OR LESS THAN $1.00, PLEASE VERIFY AMOUNTS.)
WGSP-76L [R67488.00] | Section: Spouse Labor Information |
What were [name of (most recent) spouse/partner] usual bi-weekly earnings on [his/her] main job with before taxes or other deductions?
(INTERVIEWER: IF MORE THAN $3000.00 OR LESS THAN $1.00, PLEASE VERIFY AMOUNTS.)
WGSP-76M [R67489.00] | Section: Spouse Labor Information |
INPATH ([WGSP-75I])
COMMENT: Is there an entry in WGSP-75I? Did R report ROP in annual time unit?
| 1 CONDITION APPLIES ...(Go To WGSP-76N) |
| 0 CONDITION DOES NOT APPLY |
WGSP-76N [R67490.00] | Section: Spouse Labor Information |
How many weeks a year did [name of (most recent) spouse/partner] get paid for in [his/her] main job in 1999?
(ENTER NUMBER OF WEEKS)
WGSP-76O [R67491.00] | Section: Spouse Labor Information |
([time unit code spar's rate of pay] = 7) OR ([time unit code spar's rate of pay] = -2)
COMMENT: Did R report "other" time unit for rate of pay, or R didn't know or refused to report time unit for rate of pay?
| 1 CONDITION APPLIES ...(Go To WGSP-76P) |
| 0 CONDITION DOES NOT APPLY |
Default Next: | WGSP-76Q |
Lead-In: | WGSP-74Q [-2:-1], WGSP-74R [-2:-1], WGSP-75V [-2:-1], WGSP-75W [-2:-1], WGSP-74O [Default], WGSP-74S [Default], WGSP-75E [Default], WGSP-75G [Default], WGSP-75H [Default], WGSP-76I [Default], WGSP-76K [Default], WGSP-76L [Default], WGSP-76M [Default], WGSP-76N [Default] |
WGSP-76P [R67492.00] | Section: Spouse Labor Information |
Was [name of (most recent) spouse/partner] paid at an hourly rate on [his/her] main job?
WGSP-76Q [R67493.00] | Section: Spouse Labor Information |
Even though you told me it is easier to report [name of (most recent) spouse/partner] earnings [time unit text for spouse's rate of pay], was [s/he] paid at an hourly rate on [his/her] job?
If Answer >= -2 AND Answer <= -1 Then Go To Q2-15A
WGSP-76R [R67494.00] | Section: Spouse Labor Information |
([WGSP-71B] = 1)
COMMENT: Did R report overtime, tips and/or commissions?
| 1 CONDITION APPLIES ...(Go To WGSP-76S) |
| 0 CONDITION DOES NOT APPLY |
WGSP-76S [R67495.00] | Section: Spouse Labor Information |
Excluding overtime pay, tips and commissions, what was [name of (most recent) spouse/partner]'s hourly rate of pay on [his/her] main job?
(INTERVIEWER: IF MORE THAN $30.00 OR LESS THAN $1.00, PLEASE VERIFY AMOUNT.)
WGSP-76T [R67496.00] | Section: Spouse Labor Information |
What was [name of (most recent) spouse/partner]'s hourly rate of pay on [his/her] main job?
(INTERVIEWER: IF MORE THAN $30.00 OR LESS THAN $1.00, PLEASE VERIFY AMOUNT.)
Q2-15A [R67497.00] | Section: Spouse Labor Information |
During the 52 weeks of 1999, how many weeks did [name of (most recent) spouse/partner] work at all jobs, either full-time or part-time, not counting work around the house?
If Answer >= -2 AND Answer <= -1 Then Go To Q2-15B
If Answer = 0 Then Go To Q2-16
Default Next: | Q2-15B |
Lead-In: | WGSP-71G [-1:-1], WGSP-71I [-1:-1], WGSP-71J [-1:-1], WGSP-71P [-2:-1], WGSP-71XB [-1:-1], WGSP-71XBB [-1:-1], WGSP-71XC [-1:-1], WGSP-71XD [-1:-1], WGSP-71XE [-1:-1], WGSP-71XF [-1:-1], WGSP-72C [-2:-1], WGSP-72G [-1:-1], WGSP-72H [-2:-1], WGSP-74D [-1:-1], WGSP-74E [-1:-1], WGSP-74K [-2:-1], WGSP-74U [-1:-1], WGSP-74V [-1:-1], WGSP-75B [-2:-1], WGSP-75J [-1:-1], WGSP-75K [-1:-1], WGSP-75Q [-2:-1], WGSP-75Y [-1:-1], WGSP-75Z [-1:-1], WGSP-76F [-2:-1], WGSP-76Q [-2:-1], WGSP-73D [Default], WGSP-73Q [Default], WGSP-74B [Default], WGSP-76P [Default], WGSP-76Q [Default], WGSP-76S [Default], WGSP-76T [Default] |
Q2-15B [R67498.00] | Section: Spouse Labor Information |
In the weeks [name of (most recent) spouse/partner] worked how many hours did [s/he] usually work per week?
If Answer = 0 Then Go To Q2-16
Q2-16 [R67499.00] | Section: Spouse Labor Information |
52 - ([Number of weeks spouse worked, either full- or part-time, at all jobs in calendar year previous to survey year])
COMMENT: Subtract the number of weeks worked from the number of weeks in a year, to produce the number of weeks that R's spouse did not work in the past calendar year.
If Answer = 0 Then Go To Q2-17
If Answer >= 1 AND Answer <= 51 Then Go To Q2-16B
If Answer = 52 Then Go To Q2-16A
Q2-16A [R67500.00] | Section: Spouse Labor Information |
You said [name of (most recent) spouse/partner] did not work in 1999. How many weeks was [s/he] looking for work or on layoff from a job?
Q2-16B [R67501.00] | Section: Spouse Labor Information |
You said [name of (most recent) spouse/partner] worked [Number of weeks spouse worked, either full- or part-time, at all jobs in calendar year previous to survey year] week(s) during 1999. How many of the remaining [Number of weeks spouse did not work, at all in calendar year previous to survey year] week(s) was [s/he] looking for work or on layoff from a job?
(ENTER NUMBER OF WEEKS LOOKING FOR WORK OR ON LAYOFF FROM A JOB:)
Q2-17 [R67502.00] | Section: Spouse Labor Information |
([spouse in hh?]=1) or ([partner in hh?]=1)
COMMENT: Does R have a spouse currently living in the household (listed on the household roster?)
| 1 CONDITION APPLIES ...(Go To CPSSP-2) |
| 0 CONDITION DOES NOT APPLY |
CPSSP-2 [R67503.00] | Section: Spouse Labor Information |
These next few questions will refer to [name of (most recent) spouse/partner]'s work-related activities last week.
Last week, did [name of (most recent) spouse/partner] do any work for pay or profit?
INTERVIEWER: READ IF NECESSARY: By last week I mean the week beginning on the Sunday before (this/this past) Sunday and (this/this past) Saturday.
| 1 YES |
| 0 NO |
| 2 RETIRED |
| 3 DISABLED |
| 4 UNABLE TO WORK |
CPSSP-5 [R67504.00] | Section: Spouse Labor Information |
Last week, did [name of (most recent) spouse/partner] do any unpaid work in a family business or farm?
CPSSP-5A [R67505.00] | Section: Spouse Labor Information |
([Spouse do any work for pay or profit last week] = 1) or ([Spouse do any unpaid work in a family business or farm last week] = 1)
COMMENT: SPOUSE/PARTNER WORK AT ALL IN LAST WEEK?
| 1 CONDITION APPLIES |
| 0 CONDITION DOES NOT APPLY ...(Go To CPSSP-5C) |
CPSSP-5C [R67506.00] | Section: Spouse Labor Information |
(([Spouse do any work for pay or profit last week]=0) AND ([Spouse do any unpaid work in a family business or farm last week]=0))
COMMENT: Did spouse/partner do no work for pay or profit and no unpaid work in
a family business or farm?
| 1 CONDITION APPLIES |
| 0 CONDITION DOES NOT APPLY ...(Go To CPSSP-41A) |
CPSSP-41A [R67507.00] | Section: Spouse Labor Information |
Last week, how many hours did [name of (most recent) spouse/partner] actually work at all jobs combined?
CPSSP-41AA [R67508.00] | Section: Spouse Labor Information |
([Actual hours spouse worked at all job last week]<=34) and ([Actual hours spouse worked at all job last week]>=0)
COMMENT: Did spouse/partner work less than 35 hours last week at all jobs?
| 1 CONDITION APPLIES |
| 0 CONDITION DOES NOT APPLY ...(Go To SHIFTSP-1) |
CPSSP-41AB30H [R67509.00] | Section: Spouse Labor Information |
Does [name of (most recent) spouse/partner] usually work 35 hours or more per week at [his/her] main job?
CPSSP-84 [R67510.00] | Section: Spouse Labor Information |
Did [name of (most recent) spouse/partner] work at a job or business during the last 12 months?
CPSSP-85 [R67511.00] | Section: Spouse Labor Information |
Did [name of (most recent) spouse/partner] do any of this work during the last 4 weeks?
CPSSP-93 [R67512.00] | Section: Spouse Labor Information |
What best describes [name of (most recent) spouse/partner]'s situation at this time? For example, is [name of (most recent) spouse/partner] disabled, ill, in school, taking care of house or family, or something else?
| 1 Disabled |
| 2 Ill |
| 3 In school |
| 4 Taking care of house or family |
| 5 In retirement |
| 6 Something else/Other (SPECIFY) |
SHIFTSP-1 [R67513.00] | Section: Spouse Labor Information |
([Spouse do any work for pay or profit last week]=1)
COMMENT: Did spouse/partner report working for pay at all last week?
| 1 CONDITION APPLIES ...(Go To SHIFTSP-86A) |
| 0 CONDITION DOES NOT APPLY |
SHIFTSP-2 [R67514.00] | Section: Spouse Labor Information |
(([Did r work at a job or business in last 12 months?]=1) and ([Any work in last 4 weeks by spouse/partner?]=1))
COMMENT: Did spouse/partner report working for pay at all last week?
| 1 CONDITION APPLIES |
| 0 CONDITION DOES NOT APPLY ...(Go To Q9-2A) |
SHIFTSP-86A [R67515.00] | Section: Spouse Labor Information |
(HAND CARD J)
Which of the following categories best describes the hours [name of (most recent) spouse/partner] (works/worked) at [his/her] main job?
| 1 Regular day shift ...(Go To SHIFTSP-86C) |
| 2 Regular evening shift ...(Go To SHIFTSP-86C) |
| 3 Regular night shift ...(Go To SHIFTSP-86C) |
| 4 Shift rotates (changes periodically from days to evenings) ...(Go To SHIFTSP-86E) |
| 5 Split shift (consists of two distinct periods each day) ...(Go To SHIFTSP-86E) |
| 6 Irregular schedule or hours ...(Go To SHIFTSP-86B) |
| 7 Other (SPECIFY) |
SHIFTSP-86B [R67516.00] | Section: Spouse Labor Information |
Who sets [name of (most recent) spouse/partner]'s hours?
| 1 Employer |
| 2 Spouse/partner |
| 3 Both spouse/partner and employer |
SHIFTSP-86C [R67517.00] | Section: Spouse Labor Information |
At what time of the day (does/did) [name of (most recent) spouse/partner] usually begin work at [his/her] main job?
SHIFTSP-86D [R67518.00] | Section: Spouse Labor Information |
At what time of the day (does/did) [name of (most recent) spouse/partner] usually end work at [his/her] main job?
SHIFTSP-86E [R67519.00] | Section: Spouse Labor Information |
At what time of the day (does/did) [name of (most recent) spouse/partner] usually begin work at [his/her] main job [last week]?
SHIFTSP-86F [R67520.00] | Section: Spouse Labor Information |
At what time of the day (does/did) [name of (most recent) spouse/partner] usually end work at [his/her] main job [last week]?